.
Hello visitors and buyers,Welcome to Our store! About the products details, there we carefully tell you: these specifics produced by AliExpress system, some of these are not correct or even wrong. So the correct products specifics is from the detailed description. Usually the description has some pictures and much words. And if you are in 110V rear. Please notice the items input voltage. As we can not mark it on few items.
About the international shipping/transportation fee, if the shipping fee is expensive, please contact us. Sometimes we can find few cheaper shipping way and we will 100% reply to you! Please carefully check the packing/box/parcel when the sender delivery.

Note: About the price of this item , if you are really interested in it, please contact us.
Attention: Because this speaker is customized , so If you want to , please wait for 30-40 days , and once we
finished it , we will send it to you soon.
(The box is made of Black walnut.)

Parameters:
Frequency range : 32Hz-30kHz
Sensitivity : (2.83V/m) 87db
Rated impedance : 8Ω
Power Range : 30-200W
Dimensions (width x height x depth) : 31cm*55cm*35cm
(Important note: After the new unit is started, it will takes a long time to move forward, and the horns will move smoothly and gradually enter a good state (100 hours for initial normal, 3-5 months for good sound).
Israels Morel mdt29 classic tweeter, sound delicate and moving, beautiful memories of generation old burning. Upgrade model cat298, the resolving power is further improved, enough to achieve a new legend.

DMN-A, HIVI top-level midrange, is pure .

D8.8+, HIVIs" Bass D8.8 improved version , rubber overhang, iconic deep bass and big dynamics.

Domestic high quality copper terminals.

Domestic Choseal oxygen-free copper inner line.

For the three-way frequency, the cabinet design and structure are extremely important. This box is up to 38L net volume, excellent structure and sheet, is the basis of sound protection. The new cabinet is made of high-quality multi-layer plywood. The strength, durability and cost are all increased, and the sound effect is further improved!
The key to a good speaker is the frequency division and adjustment. The original divider scheme, adjusted several times, started to sound well!
Low frequency tunnel uses high-quality core inductors, non-polar capacitors,middle and high frequency tunnel uses a full set of hollow inductors, Taiwan-made Yontex capacitors, superior quality.
Using professional audio testing equipment with an accuracy of 99%, in the studio through the "time window technology" (eliminating the impact of reflection and noise), far and near occasions, and measured several professional indicators chart:

Frequency response chart (Figure analysis shows that the frequency response reaches a high level of 32Hz-25kHz ± 3dB).

Impedance-phase diagram: (blue is impedance , yellow is phase ).

Chart: