Advantages of our WiFi wireless speakers
1. Wifi speakers have long transmission distance and good penetration.
2. Compared with Bluetooth technology, WIFI loudspeaker has higher data transmission rate, 150M transmission bandwidth can fully meet the requirements of lossless music and HD video transmission, there is no waveform distortion and detail loss of pinching, it can match with higher quality audio CODEC, get better audio index, and can penetrate the wall, so it is considered as the rationale to realize high-quality wireless music broadcasting. Think technology.
3. Wifi speakers can connect two devices directly, and can also form a network through wireless routing. It is WIFIs greatest advantage over Bluetooth that it can form a network. Take the existing iPhone and Googles Android for example. Through WiFi connection, the iPhone connects the speakers through Air Play, which can play all the speakers in the LAN at the same time, and can play different sounds on different speakers. At the same time, it can meet the needs of network browsing, which Bluetooth does not have.
WIFI wireless speaker (including 2 speakers). With RJ45 interface) XBPA-1020F

Product introduction
Hi-fi coaxial WIFI wireless ceiling speaker is an intelligent wireless audio data transmission wi-fi speaker independently developed by our company. Based on the design of wireless LAN, it aims to provide customers with high efficiency, high quality and high stability stereo wireless transmission ceiling speaker. Built-in digital power amplifier, using stable and effective D class digital power amplifier chip, 60W stereo output, customers only need to put the speaker into the wireless LAN, you can quickly achieve the wireless transmission of music, enjoy the fun of wireless music. The Wifi speaker comes with a mobile phone APP. A mobile phone APP can connect to 10 Wifi speakers. Each Wifi speaker can receive different audio signals at the same time. WIFI speaker can set alarm clock to play custom music.
Product features
Support ios/Android/Windows/MAC to share music to music receiver through WIFI
Support for airplay audio formats are: aac,mp3,wav,flac.
Support for online music and local music
Support high quality lossless music output
Support DLNA, Airplay, Qplay
WiFi encryption methods are: WPA,WPA2,WPA2 Mixed
In line with 802.11b/g/n standard (Max 150Mbps)
There are free apps on Android,iOS,Windows,MAC and other systems
Support for iPhone, iPad, iPod touch and Android
The equipment is installed in the family bathroom, office, guest room and other places. The products are widely used in the family living room, bedroom, conference hall, office building, school classroom and so on.Each WIFI speaker can be connected to a passive speaker to form stereo sound.
The product is installed on the ceiling and has an external audio input. WIFI signal is preferred. When there is WIFI audio signal, it will automatically switch to WIFI audio signal. The digital constant resistance power amplifier adopts high-efficiency audio chip, and the speaker adopts high-end coaxial high-fidelity loudspeaker to meet the medium-high-end background music and broadcast application scenarios.
Integrated day fancy design, delicate and beautiful, exquisite technology, all show high-grade temperament;
When there is no audio, the device will enter the standby state, and the signal will be turned on immediately without delay. With dc backup interface,
Digital power amplifier with intelligent gain adjustment, adaptive power supply and automatic power adjustment is always in the working state of performance optimization and efficiency maximization. High fidelity and high sensitivity amplification unit, with abundant power, high fidelity CD quality;
Full band, high sensitivity amplification unit, with abundant power, high fidelity CD quality;
Stereo output 30W*2.
With flame retardant metal rear cover, safer use;
Technical parameters:
Type no.
XBPA – 1020F
The power supply
Audio interface
DC24V 2A
The 3.5 MM
Wi-fi standard
802.11 b/g/n
WiFi encryption
WPA, connected, connected Mixed
Support for audio formats
Aac, mp3, wav, flac.
The APP
DLNA, Airplay, Qplay
Signal to noise ratio
90 db
Rated power
30W * 2
Standby power consumption
< 2W
Frequency response
60 hz ~ 18 KHZ + 1 / - 3 db
Harmonic distortion
THD 1% or less
Signal to noise ratio
88 db or higher
Load the horn
8 Ω
Packing list
Surround sound passive speaker *1, active speaker *1, power adapter *1, manual *1, warranty card *1
Speaker unit
5.25 "coaxial loudspeaker.
Frequency division circuit
2 frequency division.
Intelligent power
Start immediately if there is a signal, cut off automatically if there is no signal
4 channel high fidelity coaxial WIFI (including 4 speakers). With RJ45 interface) wireless ceiling speaker XBPA-1040F

Technical parameters:
Type no.
XBPA – 1024F
The power supply
Audio interface
DC24V 4 a
The 3.5 MM
Wi-fi standard
802.11 b/g/n
WiFi encryption
WPA, connected, connected Mixed
Support for audio formats
Aac, mp3, wav, flac.
The APP
DLNA, Airplay, Qplay
The network interface
RJ45 standard interface
Rated power
30 w * 4
Standby power consumption
< 2 w.
Frequency response
60 hz ~ 18 KHZ + 1 / - 3 db
Harmonic distortion
THD 1% or less
Signal to noise ratio
88 db or higher
Load the horn
8 Ω
Packing list
Surround sound passive speaker *3, active speaker *1, power adapter *1, manual *1, warranty card *1
Speaker unit
5.25 "coaxial loudspeaker.
Frequency division circuit
2 frequency division.
Intelligent power
Start immediately if there is a signal, cut off automatically if there is no signal.
2.1 channel high-fidelity coaxial WIFI wireless network (including 3 speakers) With RJ45 interface)) ceiling speaker XBPA-1210F

Technical parameters:
Type no.
XBPA -1210F
The power supply
Audio interface
DC24V 5 a
The 3.5 MM
Wi-fi standard
802.11 b/g/n
WiFi encryption
WPA, connected, connected Mixed
Support for audio formats
Aac, mp3, wav, flac.
The APP
DLNA, Airplay, Qplay MUZO
The network interface
RJ45 standard interface
Rated power
30 w + 30 w + 60 w
Standby power consumption
< 2 w.
Frequency response
60 hz ~ 18 KHZ + 1 / - 3 db
Harmonic distortion
THD 1% or less
Signal to noise ratio
88 db or higher
Load the horn
8 Ω
Packing list
Stereo speaker *2, woofer *1, power adapter *1, manual *1, warranty card *1
Stereo speaker unit
5.25 "coaxial loudspeaker.
The bass unit
6 inches 60 w
Intelligent power
Start immediately if there is a signal, cut off automatically if there is no signal
Home theater 5.1 channel WIFI (with RJ45 interface) wireless ceiling speaker XBPA-1051F

Technical parameters:
Type no.
XBPA – 1051F
The power supply
Audio interface
DC24V 6 a
The 3.5 MM
Wi-fi standard
802.11 b/g/n
WiFi encryption
WPA, connected, connected Mixed
Support for audio formats
Aac, mp3, wav, flac.
The APP
DLNA, Airplay, Qplay
The network interface
RJ45 standard interface
Rated power
30 w * 5 + 60 w
Standby power consumption
< 2 w.
Frequency response
60 hz ~ 18 KHZ + 1 / - 3 db
Harmonic distortion
THD 1% or less
Signal to noise ratio
88 db or higher
Load the horn
8 Ω
Packing list
Surround sound passive speaker *5, bass active speaker *1, power adapter *1, manual *1, warranty card *1
Speaker unit
5.25 "coaxial loudspeaker. Bass unit 6 inches.
Frequency division circuit
2 frequency division.
Intelligent power
Start immediately if there is a signal, cut off automatically if there is no signal.