GLEDOPTO ZIGBEE & RF LED E27/E26 BULB

Name
12W rgbcct globe bulb Plus
Voltage
100-240V
Luminous flux
900-1100lm
Dimension
70X147mm
CRI
>80
LEDs
Epistar LEDs SMD5050 RGB 4pcs SMD3030 white 24pcs

User Instruction


Connection with Gateway(Require zigbee hub)
1. Connect the LED lights.
2. Start the device searching on the ZigBee Light Link Gateway, it could take some time. If the Gateway does not find the device, plug power off/on or make a reset.
3. The Gateway found your device and you can assign it to the different rooms/zones/groups.
4. Now you can use the device.

Link & Use the RF Remote Control(No need zigbee hub)
1. Within 3 seconds after power on, click the "on" button of the group to conduct code matching, and the LED light turns green, indicating successful code matching. 2. Long press the "off" button of the remote control to enter the night light mode, and the brightness and color can still be adjusted at this time.
3. Long press the small moon key to enter the 60 seconds delay power off state.
4. Long press M key to enter automatic pre-modes.
2.4G RF & Zigbee Hub Control

GLEDOPTO ZIGBEE & RF MOOD COLOR SMART BULB
Personalize your lights with a color palette of over 16 million colors including warm white and cold white

The Gledopto Bulb works withAmazon AlexaandGoogle Assistant.Assign a name to each Smart Bulb and communicate each bulb by name when making a voice command. You can alsocreate groupsfor all your smart devices and control them all in one command.

With free phone app, you can control the lampswherever&wheneverthrough the internet, to make the house more security.Customize Lighting-Night, Read, Working and Leisure. You can also edit/adjust the lights to achieve your desired lighting effect.

Timers & SchedulesVia the app, you can easily add timers to make the light turn on/off automatically at a preset time.

Color temperatureis adjustable from 2000K to 6500K so you can choose from soft warm white to daylight white. Dimmable.
Customer Reviews