Zigbee smart magnetic door sensor controlled by mobile APPThis is the Zigbee wireless smart magnetic door sensor. It adopts low consumption Zigbee wireless module, long battery use life. Detect door or windows status by closing or opening magnet part with detector. Designed with double reeds, it can be used in different direction open doors or windows, easy instal lation and flexible to use. It is suitable for residence, villa, houses, work shop, Mall, Warehouse, office building, Bank etc., for anti-burglar alarm.

Main FeaturesPower:3V Battery, 1 year use life
Size:60* 30* 11.8mm
Sensitivity:15m
Features:
1. Low consumption Zigbee moudle.
2. Zigbee HA1.2 protocol
3. Low consumption design, long battery use life
4. Double reed design, easy use for different direction door
5. door"s open/ close status is detectable
6. low battery warning
Specification
Power Supply DC 3V (CR2032 battery)
Static Current ≤5uA
Alarm Current ≤30mA
Detecting Distance >20mm
Networking ZigBee Ad-hoc Network
Wireless networking distance <100m (open area)
Working temperature -10 to +50°C
Working humidity 95% RH
Dimension 79* 68* 31mm (no including plug)
InstallationStep 1 :
Remove battery insulation film to power on.

Step 2:
Open app and click "Add" button to enter networking mode.

Step 3:
Follow APPs prompts, press networking key for 2 seconds until see green LED blinking fast. It will prompt on APP when add device successfully. (Blue LED: networking key, Green LED: networking status indication)

Step 4:
Please install detector align with magnet part. The spacing between detector and magnet part should be less than 15mm (the magnet part can be installed at left or right of detector)

Step 5:
Tear off double tapes back film, fix detectors hang board and magnet part at suitable position. (As picture, detector should be installed on door frame or fixed position. magnet part can be installed at movable part)

Step 6:
Insert detector to fixed hang board.

APP Interface