Original Xiaomi Wireless Mi WiFi Amplifier 2 300MPS Universal Xiaomi Mi Wifi Repeater Xiaomi USB Portable WIFI Wireless Router
FAQ:
What do the different colors of the indicator light mean?
The blue light is always on: the amplifier is running normally, and the WiFi pairing is successful.
The yellow light is always on: the amplifier is starting up, the process is very short, about 10 seconds.
Blinking blue: Waiting for pairing, pairing, or pairing failed.The pairing failed. The original networks WiFi password may be changed or it may be far from the original network.
Steady red light: The boot failed, please re-plug and try to repair. If the problem persists, please call after-sales service.
Why The amplifier is always flashing orange, then the blue light is flashing?
The initial setting was unsuccessful. After inserting the Xiaomi router USB, the pairing could not be completed.
Please upgrade your router to the latest development or stable version (2.0 or above)
Check if the amplifier has been paired. If it has been paired, please reset the amplifier to the factory settings (hold the reset hole with the card pin for 5 seconds), then re-pair
The paired amplifier appears blue flashing
Try plugging or unplugging the amplifier, or reset the amplifier (use the PIN pin to hold the reset hole for 5 seconds) before re-pairing
How to customize the network name and password of the amplifier?
Not supported yet,
How to upgrade the firmware?
When the amplifier is idle, it is found that the upgradeable version will automatically complete the upgrade;
In addition, you can manually upgrade to the latest firmware through the Xiaomi routing client or Xiaomi smart home client.
Why cant the amplifier get the signal from the router?
Need to connect the router at close range, so that the amplifier can get a stable signal, at least two squares or more .
WiFi Reperter Version 2 Description:
Main Features:
Light weight ( 30g only ), you can carry with it and pair with the routers easily
No need to switch the hotspot, WiFi signal enhance up to double
Special USB power supply unit, the USB can be rotated at 180 degree. Charging for the WiFi amplifier is so convenient
XiaoMi WiFi 300M amplifier can upgrade automatically without any setting
Accurately detecting the connection state and strength of signal
Plug and play, no need to install any drive
Auto pairing with Xiaomi router within 1m distance
Note:
** This repeater do not support WIFI router with WEP encryption type **
** This repeater may not work with Modem with wifi function( wifi and modem is same device)**
** This repeater may not working with public wifi signal**
** only work with 2.4g singal**
if you have question for this repeater, please let us know.
Universal compatability with other brand routers download via 2 steps
Step 1: Open Mihome APP and detect Xiaomi repeater
Step 2: Enter WIFI password and click connect
Up to 100% improvement in WIFI coverage
Please download MiHome APP after purchase; repeater setup requires this APP
Brand Name: Xiaomi
Interface: USB 2.0
Transmission Rate: 300Mbps
Antenna: Built-in
WiFi Network Frequency: 2.4GHz
Chip type: Ralink
Network Communiction: 3G Only
Packing List: 1 x Original Xiaomi Repeater Version 2
Version 2 Picture Display: