Product name Display method Specification(mm)
Three-phase multifunction LCD 72×72 80×80 96×96 120×120
Three-phase voltage LCD 72×72 80×80 96×96 120×120
Three-phase current LCD 72×72 80×80 96×96 120×120
Three-phase voltage and current LCD 72×72 80×80 96×96 120×120
Three-phase voltage LED 72×72 80×80 96×96 120×120
Three-phase current LED 72×72 80×80 96×96 120×120
Three-phase voltage and current LED 72×72 80×80 96×96 120×120
Three-phase multifunction LED 72×72 80×80 96×96 120×120
Single phase multifunction LED 96×48 72×72 80×80 96×96 120×120
Single phase voltage LED 96×48 72×72 80×80 96×96 120×120
Single phase current LED 96×48 72×72 80×80 96×96 120×120
Single phase voltage and current LED 96×48 72×72 80×80 96×96 120×120
Single phase power LED 96×48 72×72 80×80 96×96 120×120
Single phase power factor LED 96×48 72×72 80×80 96×96 120×120
Single phase frequency LED 96×48 72×72 80×80 96×96 120×120


LED Display---Full-electric parameter measurement,0.5 Class,4 digits,Single Phase Frequency,Measuring Range:45-65Hz
SET/OK Button: Confirm after digital settings
Back: back to prebious setting
Selection:Select from Right to Lift
Selection:Select from Left to Right / use to increase the value

Snap-in type
Easy installation
Easy maintaining

LED Display: Large scream with display quality and good brightness. Use high-cost IC chip as an important part.
Programming button: Its keystrokes up to 100,000 times , using high-quality clips, in strict accordance with international certification standards.
Also can adjust the ratio parameters casually!

Panel is made up of import high molecular compound, pressed into the mold.It does not react with acid, alkali, high temerature and corrosionresista nee, good bright ness and has excelle nt flexibility, none-deforma-tion after bending.ect.

All our products can add additional functions, such as communication
RS485,alarm output,switch input,transmitting output and so on.

Overall dimensions and mounting holes size figures are for reference only.

Intelligent Digital Meter is suitable for monitoring and displaying electrical parameters of current in power grid and automation systems. It is a new design meter with advantages of high accuracy, good stability, and resistance to vibration.
LED multifunctional meters can accurately measure and display all the common electrical parameters of three phase power grid, such as three phase voltage and current, active power, inactive power, power factor, frequency, active energy, reactive energy, communication interface, and energy pulse output function. with MODBUS-RTU communication protocol, the meter can display by RS-485 remote digital communication. With features of convenient installation, easy wiring and maintenance, programmable at site etc.the meters can also proceed the networking communication between different PLC and industrial control computers among the industry
Technical Data
Wiring
Three phase
Rated current
AC5A
Rated voltage
0-500VAC or 0-100VDC
Overload
Permanent: 1.2 times; temporary: 2 times/10s
Accuracy
Class 0.5
Frequency
45-65 Hz
Operation range
AC400V
Working range
AC 80V~270V,AC 220V,AC 380V,AC 100V
Power consumption
≤ 5VA
Communication
RS-485, MODBUS-RTU protocol
Working temperature
-10~+55
Relative humidity
≤93 %,in the place without corrosive gas