DZS100-1P Lora Meter Single Phase Din Rail Smart Energy MeterSeries of DZS Power Meters are used for measuring and monitoring the power distribution system. This series combines the measurement, the analysis and the operation together. People can check the figure of current or voltage by using the keys on the meter, and through the interface of RS485. The meter can upload the information to an upper machine, which makes the information become clearer, and the operation become easier.
Functions
- Measuring single phase current, single phase voltage, active power, reactive power, apparent power, frequency, power factor, active energy, reactive energy, and some other parameters of power;
- Pulse Output of active energy;
- Output of PPS;
- 1 interface of RS485 with Modbus RTU communication protocol;
- LCD display
Product Parameters
Accuracy Class Active Energy: 1
Input Rated Value Voltage: 220V; Current: 5(40)A, 10(60)A
Overload Voltage: Sustained Overload: 1.2 times of the rated value
Momentary Overload: 2 times of the rated value
Current: Sustained Overload: 1.2 times of the rated value
Momentary Overload: 10 times of the rated value
Frequency 45-60Hz
Functional Module Pulse Constant 1600 imp/kWh, 800 imp/kWh
Interface 1 RS485; Adaptive Protocol: Modbus RTU Protocol or 645-2007; Baud Rate: 1200-19200bps
Power Supply Working Range AC: 85-265V; DC: 85-300V
Consumption < 3W
Working Condition Temperature Operating: -20~+60 Storage: -40~+70
Humidity Relative Humidity: <75% (place without corrosive gas)
Altitude <4000m
Installation Din rail standard installation; Dimension: 90×18×72(±0.5mm)