Product Parameters
OLFLEX CHAIN 809 CY PVC Power Towline Cable

Cable Construction

Design:acc. to UL AWM Style 20886, CSA C22.2 No. 210-15 and based on EN 50525-2-51 resp. VDE 0285-525-2-51
Certification:UL AWM Style 20886 (File No. E503806)
Conductor:fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5Insulation:PVC
Outer sheath:PVC
Taping:non-woven wrapping
Core identification code:acc. to VDE 0293-1, with or without GN/YE ground conductorblack cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334Rated voltage:U₀ / U: 300 / 500 V
UL/CSA: 1000 V
Test voltage :
core / core:4000 V AC
core / screen:2000 V AC
Minimum bending radius:
flexing up to 3m travel distance (horizontal, self supporting):up from10 x cable diameter
flexing up to 10m travel distance (horizontal, sliding):up from 12 x cable diameter
Temperature range :
flexing (VDE):0 C up to +70 C max. conductor temp.
flexing (UL/CSA):0 C up to +80 C max. conductor temp.
fixed installation (VDE):-40 C up to +70 C max. conductor temp.
fixed installation(UL/CSA):up to +80 C max. conductor temp.
Flammabilityflame retardand acc. to IEC 60332-1-2 resp.VDE 0482-332-1-2
UL: vertical flame test VW-1

Oil resistanceTM54 acc. to DIN EN 50290-2-22
Torsional stress :TW-0 (5000 cycles at ≥ +5C)
TW-1 (2000 cycles at ≥ -20C) ± 150 /m at 1 revolution per minute
Testsacc. to IEC 60811 resp. VDE 0473 part 811, EN 50395, EN 50396, UL 1581 and CSA C22.2

Application scope
OLFLEXCHAIN 809 CY are high flexible PVC power and control cables designed for the European, North American and Canadian market, for flexible use and fixed installation under light or medium mechanical load conditions.They are among others designed for use in dry, damp or wet areas.If using outdoors, observe the indicated temperature range and use with UV protection. They are largely resistant to acids, alkalis andcertain oils at room temperature. If using outdoors, observe the indicated temperature range and use with UV protection. They are largely resistant to acids, alkalis and certain oils at room temperature.They are especially suitable for basic requirements (Basic Line) in power chains and in permanently moved machine parts. They are suitable for linear, automated movements. The maximum tensile load is 15 N/mm² of conductor cross-section during installation and operation.Compulsory guidance is not permitted. The screening braid protects against interference from electrical fields.Application range:Power chains or moving machine parts, measuring, control and regulation circuits, wiring of machines, tools, devices,appliances and control cabinets.This cable is suitable for torsion application in wind turbines (WTG). The torsional load is limited to applications, as they typically occur in theloop of a wind turbine.USE acc. to UL: PVC sheathed cable for external interconnection or internal wiring of electronic equipment.USE acc. to cRU:Cables for internal wiring or external interconnection with or without mechanical abuse




Characteristics
1. Suitable for torsion applications, typical applications are bridging areas in wind turbines (WTG)
2. Flame retardancy: UL/CSA: VW-1, FT 1IEC/EN: 60332-1-2
3.EMC anti-electromagnetic interference
4. Low viscosity surface

Advantage
1. High cost performance ratio2. Fine, light, no inner sheath3. Multiple Standard Certification, Reduce Inventory Type and Save Cost4. Certified by Manufacturers of Export Machinery, Equipment and Equipment of the United States and Canada5. Copper wire shielding meeting EMC requirements to prevent electromagnetic interference


Product Details Show







Main Products

ANRBT900P
Flexible anti-twist robot shielded cable

ANF8001
High speed flexible towline cable

ANF9012
PUR double sheathed copper mesh shielded towline cable

H05VV5-F
Ultra-flexible PVC oil resistant control cable

NYSLYCY
Transparent sheathed copper mesh shielded control cable

LIYCY-CY
PVC insulated tinned copper wire double shielded data cable