Direct Buried Single Mode Multimode Multi Core Outdoor GYTA53 Fiber Optic Cable

GYTA53 The fibers,250μmm,are position in a loose tube made of a high modulus plastic.The tube are filled with a water resistant filling compound.A steel wire,sometimes sheathed with ployethylene(PE) for cable with high fiber count,locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core.
An Aluminum Polyethylene Laminate(APL) is applied around the cable core,which is filled with filling compound to protect it from water ingress. Thn the cable core is covered with a thin PE inner sheath.After the PSP is longitudinally applied over the inner sheath,the cable is completed with a PE outer sheath.
Cable Structure:


Characteristics:
Steel wire strength filler protect tube fiber. Steel tape armord. Good ultra violet radiation resistant property. Double sheath and Double armored . Good moisture resistance.

Cable
Count
Out
sheath
Dia.
Weight
Minimum
allowable TensileStrength
(N)
Minimum
allowable
Crush Load
(N/100nm)
Minimum
Bending
Radius(MM)
Storage
Temperature
(MM)
(kg)
Short term
Long term
Short term
Long term
Short term
Long term
(°C)
24
14.5
155
3000
1000
3000
1000
20D
10D
-40+60
36
14.5
155
3000
1000
3000
1000
20D
10D
-40+60
42
14.5
155
3000
1000
3000
1000
20D
10D
-40+60
48
15.5
210
3000
1000
3000
1000
20D
10D
-40+60
60
15.5
210
3000
1000
3000
1000
20D
10D
-40+60
72
15.5
210
3000
1000
3000
1000
20D
10D
-40+60
96
16.5
275
3000
1000
3000
1000
20D
10D
-40+60
144
19.6
345
3000
1000
3000
1000
20D
10D
-40+60

Adopted to Outdoor distribution. Suitable for aerial pipeline laying method. Long distance and local area network communication.Method of installation:
Direct burial preferred, other methods of installation are also available.




FAQ

More Products Style
More Products Style May Be More Attract To you
Click Below Pictures To Learn More Detail