☰
90 degree 1ft USB C male to USB Micro 5pin male cable for DJI Drone
Cable / 3 in 1 USB Cable
90 degree 1ft USB C male to USB Micro 5pin male cable for DJI Drone
Product name 1ft right angle USB C male to left angle Micro usb 5pin male cable for DJI
Length 30cm
Color Black
How to use easy charge your Type C phone to your android phone
OD 3.5mm
Packing Transparent PE Bag
Brand Cabletolink
Before order please kindly leave your new address and phone number
Compacification For Mavic Pro/Mvic 2Pro/Spark Remote controller
Note Your phone device should have OTG Function
2. Product property
2.1 Test condition:
Each test are processing under the following conditions except other demands
Temperature:15~40;
Relative humidity:45%~75%;
Atmospheric pressure:Normal atmospheric pressure;
2.2 usb working voltage: DC2.5~8V
2.3 usb working current: <DC800mA
2.4 USB Cable 28# Conductor resistance value:<0.223ohm/m
USB Cable 26.#Conductor resistance value:<0.139ohm/m
2.5 USB cable length tolerances are +-2mm
2.6 USB Cable suit for temperature range
2.6.1 Working temperature:-20~70
2.6.2 Storage temperature:-40~80
2.6.3 Humidity range: 25%R.H. ~90%R.H
3. Product reliability test
3.1 Rocking Test
3.1.1 Test Conditions: When the USB data line is not working, test the stress between the USB data line and the cell phone controller.
3.1.2 Test method:200 grams of force (wire OD > 3 mm) was applied along +-/30 direction, 1000 cycles per direction/30 cycles per minute.
3.1.3 There should be without mechanical damage for the tested products. USB data cable should be able to communicate correctly and completely when power is on.
3.2 High and Low Temperature Test
3.2.1 Test Conditions: When the USB data cable is not working, the USB data cable is placed in the relevant test equipment. The test method is carried out according to the requirements of the basic environmental test procedures for electronic products.
No. Test item Test conditions Test time Quantity
1 Hi-Temp.Storage 60, 12hrs 5pcs
2 Low Temp.Storage -40 12hrs 5pcs
3 Constant temperature and humidity test 40,90%RH 12hrs 5pcs,
3.2.2 After testing, there should be without mechanical damage for the product. USB data cable should be able to communicate correctly and completely when working under normal environment.
3.3 Salt spray test
3.3.1 After 8 hours in the salt fog environment of + 35 C and 5% NaCI, the salt deposits on the surface are washed with flowing water and put in (55 C) for 0.5 hours.The environment temperature is restored for 2 hours. Then the appearance of the hardware surface is tested. There is no oxidation phenomenon on the hardware surface.The performance test shows that the USB data cable should be able to communicate correctly and completely when the power is on.
3.4 Plugging force test
3.4.1 Insert the USB port into the corresponding connector. Before connecting, make sure that the components of the connector are OK
3.4.2 Insert the plug and USB port into the corresponding connector at the rate of 200 plugs per hour. When the connector is repeatedly unplugged up to 2000 times, the function and appearance of the product should be tested. There should be no mechanical damage to the product. When the power is on, the USB data cable should be able to communicate correctly and completely.
3.4.3 There should be no mechanical damage for the tested product. USB data cable should be able to communicate correctly and completely when working under normal environment.
3.5 Conduction impedance: The impedance at both ends is less than 0.2_when DC 300V voltage is applied.
3.6 Insulation Resistance: 500 VDC is added between the relevant parts, and the insulation resistance is not less than 10 M.
3.7 Electric Resistance Strength: After the input and output voltage of the data line are 500V and the time is 60S, the appearance communication function is normal.
4. Appearance requirement
4.1 The product has uniform color, no bottom penetration, peeling, discoloration and inconsistent color of each component.
4.2 Insufficient injection, bubbles, subsidence, scratches, burrs, and whitening are not allowed in the plastic shell. No rust is allowed on the metal parts, and the surface coating is bright.
4.3 No flaking, distortion, discoloration, fading, bubbles, unclear font and other phenomena are found on the surface markings of the products. The markings should be clear and meet the relevant requirements.
4.4 Good contact between plug and female plug
5. Transport and storage
The packaging for products should be designed according the demand specifications,in order to prevent severe vibration, shock and extrusion, sunshine, rain and corrosive air environment during transportation.
Product storage environment should be - 20 ~65 C, relative humidity not more than 75% of the clean, dry, ventilated indoor, avoid contact with corrosive substances, should be away from fire and heat sources.
Technology
cable Length:30CM
Product Function
1.Connector:angle USB Type C male
2.The other connector:angleUSB Micro usb 5pin male
3.You can charge your android phone to your type c phone with this cable
Our Services
24 hours reply/7 days
Product Uses
90 degree 1ft USB C male to USB Micro 5pin male cable for DJI Drone - ANKUX.COM
90 degree 1ft USB C male to USB Micro 5pin male cable for DJI Drone - ANKUX.COM
90 degree 1ft USB C male to USB Micro 5pin male cable for DJI Drone - ANKUX.COM
90 degree 1ft USB C male to USB Micro 5pin male cable for DJI Drone - ANKUX.COM
90 degree 1ft USB C male to USB Micro 5pin male cable for DJI Drone - ANKUX.COM
factory photo
90 degree 1ft USB C male to USB Micro 5pin male cable for DJI Drone - ANKUX.COM
FAQ
Questions and Answers
Q1.About our company?
A1.Cabletolink professional produce usb data cables/Audio/video cables from 2013.
There are four cable assembly lines in our factory.
We have our own R&D team,We can open moulding and mass produce according to your idea
Q2.About samples?
A2.Yes,we would like to send you 2pcs samples for test.
Samples fee always usd45 include shipping fee by DHL.
Samples time is 3 days
So you can receive the samples in 5-7 days after you place the samples order
Q3.About the payment way?
A3.We usually accept alibaba trade assurance payment.
You can place the order directly through our alibaba store link.
It is much safe for your payment.
Delivery goods on time
Best service after sale
Q4.About LOGO Print?
A4.MOQ:1000PCS Logo print free
(Please send us your LOGO AI File,We can show you the drawing photo in two days)
After confirm the samples,We produce mass product.
Q5.About the cable drawing?
A5.We only supply the drawing after receive the samples order.
Q6.About delivery time?
A6.We usually delivery the goods in 3-12 working days
Q7.About Delivery way?
A7.We usually use DHL/FedEX/UPS/TNT.
But if your area belongs to remote area,Please kindly undertake the remote shipping fee(usd60)
Q8.About the address and invoice value?
A8.Before delivery,we will confirm the address and invoice value with you.
If you demand low the value,Please kindly tell us in advance.
Q9.About the packing?
A9.We usually use white bag packing for each item
We can packing the goods according to your demand,But The MOQ is 1000pcs
Q10.About MOQ?
A10.Our usually MOQ is 100pcs
For the first time,we would like to supply you 50pcs.